Products
DIV INF PCA9685 PWM Header Board for GPIO
Pricing on request
Upgrade your robot's PWM control with a DIV INF PCA9685 PWM board.
Designed to be mounted to 40-pin GPIO headers.
Using only two pins, control 16 free-running PWM outputs.
I2C-controlled PWM driver with a special binned EXTERNAL clock. That gives your PWM much higher precision, unlike other PCA9685 boards.
Specifically designed for repeatable use of servo motors. If you check the PWM variance of multiple boards, you will find that our error is much lower than any other board and consistent!
Features:
- Upgraded with a larger capacitor for less input voltage ripple from buck converters for external power.
- 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate.
- Configurable push-pull or open-drain output
- Output enable pin to quickly disable all the outputs
- Terminal block for power input (or you can use the 0.1" breakouts on the side). Reverse polarity protection on the terminal block input. The terminal block included with your product may be blue or black.
- Green power-good LED
- 3-pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1" so you can only stack 4 next to each other on 0.1" header)
- "Chain-able" design
- 220 ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial
- Solder jumpers for the 6 address select pins
Email us for pricing and availability; we'll confirm price, shipping and payment in writing. Shipping and returns are set in each quote and agreement. See our Terms.



